Remote Control Manual Switch
HOLD / MANUAL switch for SAR-830/AP or SAR-1000 (please specify).
MRI-1 Bulk Pneumatic Tubing Set
Bulk 4mm OD pneumatic tubing for MRI-1; available in the following colors: clear, red, green, blue, yellow (please specify color when ordering); 100 ft.
MRI-1 Replacement Tubing Set
Special pneumatic tubing for remote valves, 18' (5.5m).
Isoflurane Kit Complete anesthesia kit
Complete anesthesia kit for Isoflurane includes vaporizer, fittings, flowmeter, & tubing
EFM-4 Flowmeter/regulator manifold
4 Flowmeter/regulator manifold, four flowmeters, specify range.
CTP-VA-3 External Valve Assembly
rabbit, cat size
MRI-1 Accessory Kit
Kit of tubing, adapters, connectors, clamps (supplied standard with MRI-1)
Pneumatic Valve M: Non-magnetic valve set with tubing & fittings, monkey - cat
The MRI-1 valve set requires two pneumatic control tubes to the MRI-1ventilator; one drives the valve into inspiration, the other into expiration. The third flexible tube carries the inspiratory airflow to the valve. The left side of each picture shows the "I" and "E" tube to the animal's endotracheal tube. Note that flow is unidirectional, so the only dead space is contained in the distal end of the "Y" connector at the tracheal tube. The standard tubing length from the main unit to the valve is 6m.
Pneumatic Valve S: Non-magnetic valve set with tubing & fittings, rabbit - large rodents
The MRI-1 valve set requires two pneumatic control tubes to the MRI-1 ventilator; one drives the valve into inspiration, the other into expiration. The third flexible tube carries the inspiratory airflow to the valve. The left side of each picture shows the "I" and "E" tube to the animal's endotracheal tube. Note that flow is unidirectional, so the only dead space is contained in the distal end of the "Y" connector at the tracheal tube. The standard tubing length from the main unit to the valve is 6m.
Pneumatic Valve XS: Non-magnetic valve set with tubing & fittings, mouse - rat
The MRI-1 valve set requires two pneumatic control tubes to the MRI-1 ventilator; one drives the valve into inspiration, the other into expiration. The third flexible tube carries the inspiratory airflow to the valve. The left side of each picture shows the "I" and "E" tube to the animal's endotracheal tube. Note that flow is unidirectional, so the only dead space is contained in the distal end of the "Y" connector at the tracheal tube. The standard tubing length from the main unit to the valve is 6m.