"T" Connector Kit
1 each 1/8", 3/16", 1/4 ID (3.17, 4.75, 6.35mm)
"W" Connector Kit
For SAR-1000 & SAR-830/AP Ventilators, pack of 2
Absorber Canisters
Replacement absorber canisters, pack of 4
Absorber Kit
Anesthetic absorber kit with absorber canister, holder, tubing, & adapters
Anesthesia Connection Kit
Includes 3/16" ID Tygon tubing, "T" fitting and tubing adapters for connecting Anesthesia system to ventilator
CTP-VA-1 External Valve Assembly
Rodent size (same as SAR-1000 internal valves).
CTP-VA-3 External Valve Assembly
rabbit, cat size
EFM-1 Flowmeter/regulator with stand
Flowmeter/regulator, specify range: 100 ml, 1, 2.5, 5, 10 or 20 liters/min
EFM-4 Flowmeter/regulator manifold
4 Flowmeter/regulator manifold, four flowmeters, specify range.
Induction Chamber Mouse
Sure-Seal Mouse Induction Chamber; 4.75 L x 4.75 W x 4.5 H (outer dimensions); volume = 62 cubic inches
Induction Chamber Mouse/ Rat
Sure-Seal Mouse / Rat Induction Chamber; 9.85 L x 4.75 W x 4.5 H (outer dimensions); volume = 139.5 cubic inches
Isoflurane Kit Complete anesthesia kit
Complete anesthesia kit for Isoflurane includes vaporizer, fittings, flowmeter, & tubing
LP-REG Low-pressure in-line regulator for use with SAR-830 series ventilators
Low-pressure in-line regulator for use with SAR-830 series ventilators, allows long, constant lung pressure inflations for imaging applications
Mouse Kit
For SAR-830/AP Ventilator: Includes External 100cc/min flow meter with stand, and low-volume tubing set for mouse (body weight 10g - 100g)
MRI-1 Accessory Kit
Kit of tubing, adapters, connectors, clamps (supplied standard with MRI-1)
MRI-1 Bulk Pneumatic Tubing Set
Bulk 4mm OD pneumatic tubing for MRI-1; available in the following colors: clear, red, green, blue, yellow (please specify color when ordering); 100 ft.
MRI-1 Replacement Tubing Set
Special pneumatic tubing for remote valves, 18' (5.5m).
MVA-4 Multivalve electrical adapter
Multivalve electrical adapter for adding up to 4 CTP-VA-1 External Valve Assemblies per ventilator.
Pneumatic Valve M: Non-magnetic valve set with tubing & fittings, monkey - cat
The MRI-1 valve set requires two pneumatic control tubes to the MRI-1ventilator; one drives the valve into inspiration, the other into expiration. The third flexible tube carries the inspiratory airflow to the valve. The left side of each picture shows the "I" and "E" tube to the animal's endotracheal tube. Note that flow is unidirectional, so the only dead space is contained in the distal end of the "Y" connector at the tracheal tube. The standard tubing length from the main unit to the valve is 6m.
Pneumatic Valve S: Non-magnetic valve set with tubing & fittings, rabbit - large rodents
The MRI-1 valve set requires two pneumatic control tubes to the MRI-1 ventilator; one drives the valve into inspiration, the other into expiration. The third flexible tube carries the inspiratory airflow to the valve. The left side of each picture shows the "I" and "E" tube to the animal's endotracheal tube. Note that flow is unidirectional, so the only dead space is contained in the distal end of the "Y" connector at the tracheal tube. The standard tubing length from the main unit to the valve is 6m.
Pneumatic Valve XS: Non-magnetic valve set with tubing & fittings, mouse - rat
The MRI-1 valve set requires two pneumatic control tubes to the MRI-1 ventilator; one drives the valve into inspiration, the other into expiration. The third flexible tube carries the inspiratory airflow to the valve. The left side of each picture shows the "I" and "E" tube to the animal's endotracheal tube. Note that flow is unidirectional, so the only dead space is contained in the distal end of the "Y" connector at the tracheal tube. The standard tubing length from the main unit to the valve is 6m.
PUMP-8 External air pump, 8 liter/min range
External air pump, 8 liter/min range
Remote Control Manual Switch
HOLD / MANUAL switch for SAR-830/AP or SAR-1000 (please specify).
Replacement Mouse Tubing Set
Replacement tubing set for SAR-830/AP and SAR-1000 Ventilators, mice.
Replacement Rat Tubing Set
Replacement tubing set for SAR-830/AP and SAR-1000 Ventilators, rats.
SAR-1000 Accessory Pack
Included with the SAR-1000 Ventilator. Includes mouse tubing set, large and tiny tubing fittings, endotracheal tubes for small and large rodents, and 9 pin male DB connector and shell. Not sold separately.
SAR-830 Pump Kit
Replacement Air Pump Kit for SAR-830/AP Ventilator.
SAR-830 Valve
Replacement Solenoid Valve set for SAR-830/AP Ventilator; includes 2 valves w/ fittings
Spare Adapters Anesthesia
Spare vaporizer inlet and outlet tubing adapters, set of 2
Test Balloon Large
Latex Test Balloon, large, rabbit size, approx.volume 20ml (pack of 5)
Test Balloon Small
Latex test Balloon, small, rat, approximate volume 5ml (pack of 5)
Test Balloon Tiny
Latex Test Balloon, extra-small, mouse, approx.volume 1cc (pack of 5)
TRACH-1 Mouse Endotracheal tube, pack of 5
Endotracheal tube, flexible Teflon with Luer connector (mouse), 20 gauge, pack of 5
TRACH-2 Rat Endotracheal tube, pack of 5
Endotracheal tube, flexible Teflon with Luer connector (rat), 14 gauge, pack of 5
VA-CABLE Replacement Valve Assembly Cable
Replacement Cable for CTP-VA-1 or CTP-VA-3 valve assemblies. 9' long.
Ventilator Filter
Replacement internal ventilator filter for SAR-series ventilators.